URE-FIL 17
Product Code:SOPAUF1704
Small grain pure aluminium pellets (400 micron) that will settle into areas of detail better, reducing voids betweeen particles. Can be added to aluminium-filled urethane and epoxy resins for vacuum forming applications to increase thermal conductivity (even heat distribution) when casting parts for aplications with higher temperature requirements. Can also be used to add evenly distributed weight to metal cold-castings to simulate the feel of solid metal reproductions at a reduced expense compared to metal foundry casting and to create artistic casting effects when used with clear and color plastics.
Will lower exothermic (heat) temperatures during cure cycle, which reduces the shrinkage rate resulting in improved dimensional stability in large mass castings. When fully cured, resin filled with URE-FIL 17 can be cut, drilled, turned and machine tooled. Should not be used as fillers in RTV rubber products.
Technical Data Sheet
Will lower exothermic (heat) temperatures during cure cycle, which reduces the shrinkage rate resulting in improved dimensional stability in large mass castings. When fully cured, resin filled with URE-FIL 17 can be cut, drilled, turned and machine tooled. Should not be used as fillers in RTV rubber products.
Technical Data Sheet
- Quantity Available: 0