Mold Star 19T
Product Code:SOSMS19TG
An easy to use, platinum silicone that features a relatively low viscosity (vacuum degassing is not required for most applications). Cures in to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star 19T will last a long time and are good for casting wax, gypsum, resins, concrete and other materials. Cured rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Has been tested and certified skin safe by an independent laboratory.
An infinite number of color effects can be achieved by adding Silc Pig or Cast Magic. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier. Note: This product will not cure against surfaces containing sulfur, even when sealed.
Technical Data Sheet
Mixing Ratio: 1A:1B by Weight or Volume
Viscosity: 11 000 cps
Pot Life: 3 Minutes
Cure Time: 12 Minutes
Shore A Hardness: 19A
Color: Translucent
Weight:
Pint: 2 lb
Gallon: 16 lb
5 Gallons: 80 lb
An infinite number of color effects can be achieved by adding Silc Pig or Cast Magic. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier. Note: This product will not cure against surfaces containing sulfur, even when sealed.
Technical Data Sheet
Mixing Ratio: 1A:1B by Weight or Volume
Viscosity: 11 000 cps
Pot Life: 3 Minutes
Cure Time: 12 Minutes
Shore A Hardness: 19A
Color: Translucent
Weight:
Pint: 2 lb
Gallon: 16 lb
5 Gallons: 80 lb
- Quantity Available: 0