OOMOO 30
Product Code:SOSOOM30P
Silicone rubber which has very low viscosity for easy mixing and pouring. Cures at room temperature, with negligible shrinkage. Suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier when pouring into or over most surfaces. Note for novice: OOMOO silicones do not have a great tear strength. They are good for making simple or two-pieces block mols. Mold Max silicones are high-strength silicones. Vacuum degassing is not necessary.
Technical Data Sheet
Mixing Ratio: 1A:1B by Volume
Viscosity: 4 250 cps
Pot Life: 30 Minutes
Demold Time: 6 Hours
Shore A Hardness: 30A
Color: Lavender
Technical Data Sheet
Mixing Ratio: 1A:1B by Volume
Viscosity: 4 250 cps
Pot Life: 30 Minutes
Demold Time: 6 Hours
Shore A Hardness: 30A
Color: Lavender
Weight:
Pint: 2,8 lb
Gallon: 20,7 lb
- Quantity Available: 0