Epsilon
Product Code:SOELEPP
A thixotropic epoxy coating that self thickens for brushing onto a variety of surfaces without sagging. This product is not sensitive to moisture or humidity. It cures at room temperature to an impact resistant plastic which exhibits good compressive and flexural strength. It is color neutral, and cured material can be easily sanded, primed and painted. Suitable for use as a protective, impact resistant coating for EPS or polyurethane foam. Can also be applied to plaster, concrete, wood and fabrics. This product contains no VOC’s.
Epsilon is packaged with a Part A base and its 101 Hardener. You can also mix Part A base with 102 Hardener (sold separately) to get a 30 minutes pot life. Can be colored with SO-Strong or UVO colorants. Clean the residue of uncured epoxy with E-POX-EE Kleener.
Technical Data Sheet
Base + Fast Cure 101 Hardener
Mixing Ratio : 100A:20B by Weight (Gram Scale required)
Viscosity: Variable
Pot Life: 15 Minutes
Cure Time: 16 Hours
Shore D Hardness: 75D
Color: Beige
Weight:
Pint: 2,8 lbs
Gallon: 11 lbs
Epsilon is packaged with a Part A base and its 101 Hardener. You can also mix Part A base with 102 Hardener (sold separately) to get a 30 minutes pot life. Can be colored with SO-Strong or UVO colorants. Clean the residue of uncured epoxy with E-POX-EE Kleener.
Technical Data Sheet
Base + Fast Cure 101 Hardener
Mixing Ratio : 100A:20B by Weight (Gram Scale required)
Viscosity: Variable
Pot Life: 15 Minutes
Cure Time: 16 Hours
Shore D Hardness: 75D
Color: Beige
Weight:
Pint: 2,8 lbs
Gallon: 11 lbs
- Quantity Available: 2