EpoxAmite HT
Product Code:SOELEAHTG
A water clear, UV resistant laminating epoxy that resists high temperatures up to 300°F / 149°C when properly cured (post cure required). (Can also be poured up to 1/2"- 1,28cm thickness). Ultra-low viscosity ensures uniform wetting out and fast penetration of reinforcement materials during hand lay-up or vacuum infusion processes. Cured resin offers superior physical properties. Can be used with S-Glass, E-Glass, kevlar and carbon fibers for making composite tooling or parts. Applications include making high temperature pre-preg parts, bonding fixtures, vacuum form molds and prototype injection molds. Also used as a backup laminating resin for EpoxAcoat HT.
For releasing from non-porous surfaces such as resin, metal, glass etc..., use Ease Release 200 or 205 to prevent adhesion. Can be colored with UVO. Clean the residue with E-POX-EE Kleener, lacquer thinner, Acetone or alcohol.
Technical Data Sheet
Mixing Ratio: 100A:33B by Weight (Gram Scale required)
Viscosity: 650 cps
Pot Life: 60 Minutes
Cure Time: 24 Hours
Shore D Hardness: 80D
Color: Clear
Weight:
Gallon: 9 lb
For releasing from non-porous surfaces such as resin, metal, glass etc..., use Ease Release 200 or 205 to prevent adhesion. Can be colored with UVO. Clean the residue with E-POX-EE Kleener, lacquer thinner, Acetone or alcohol.
Technical Data Sheet
Mixing Ratio: 100A:33B by Weight (Gram Scale required)
Viscosity: 650 cps
Pot Life: 60 Minutes
Cure Time: 24 Hours
Shore D Hardness: 80D
Color: Clear
Weight:
Gallon: 9 lb
- Quantity Available: 0