Mold Max 15T
Product Code:SOSMM15TP
A water white translucent tin cured silicone rubber compound that has exceptional tear strength and working properties and a long library life. Similar in appearance to Smooth-On’s premium Dragon Skin platinum silicones. An infinite number of color effects can be achieved by adding Silc Pig silicone pigments, Ignite liquid fluorescent colorants or Cast Magic powders. Can be thickened with Thi-Vex thickener for brush-on application and effects. Can also be thinned with Silicone Thinner. Accel-T will accelerate the cure time (working time will be reduced).
Mold Max ‘T’ series silicones should NOT be used to make molds for casting Crystal Clear or Clear Flex Series urethanes. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier when pouring into or over most surfaces. Recommend vacuum degassing using a Vacuum Chamber & Pump.
Technical Data Sheet
Mixing Ratio: 100A:10B by Weight (Gram Scale required)
Viscosity: 20 000 cps
Pot Life: 45 Minutes
Demold Time: 24 Hours
Shore A Hardness: 15A
Color: Translucent
Weight:
Pint: 2,2 lb
Gallon: 9,9 lb
Mold Max ‘T’ series silicones should NOT be used to make molds for casting Crystal Clear or Clear Flex Series urethanes. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier when pouring into or over most surfaces. Recommend vacuum degassing using a Vacuum Chamber & Pump.
Technical Data Sheet
Mixing Ratio: 100A:10B by Weight (Gram Scale required)
Viscosity: 20 000 cps
Pot Life: 45 Minutes
Demold Time: 24 Hours
Shore A Hardness: 15A
Color: Translucent
Weight:
Pint: 2,2 lb
Gallon: 9,9 lb
- Quantity Available: 3