Mold Max 40
Product Code:SOSMM40P
Tin-cured silicone that have exceptional working properties and library life. Will reproduce the finest detail like sculpture and architectural elements and more. Used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins, without using a release agent (Ease Release 200 can be used to faciltate demolding). High tear strength. Thi-Vex is NOT compatible with Mold-Max 40. Can also be thinned with Silicone Thinner. Accel-T silicone rubber accelerator will accelerate the cure time (the pot life and the library life will be shortened). Can be pigmented with Silc Pig colorants. Recommends vacuum degassing using a Vacuum Chamber & Pump.
Technical Data Sheet
Mixing Ratio: 100A:10B by Weight (Gram Scale required)
Viscosity: 45 000 cps
Pot Life: 45 Minutes
Demold Time: 24 Hours
Shore A Hardness: 40A
Color: Mint Green
Weight:
Pint: 2,2 lb
Gallon: 11 lb
5 Gallons: 55 lb
Technical Data Sheet
Mixing Ratio: 100A:10B by Weight (Gram Scale required)
Viscosity: 45 000 cps
Pot Life: 45 Minutes
Demold Time: 24 Hours
Shore A Hardness: 40A
Color: Mint Green
Weight:
Pint: 2,2 lb
Gallon: 11 lb
5 Gallons: 55 lb
- Quantity Available: 0