Shell Shock Fast
Product Code:SOPSSFP
A thixotropic plastic that self thickens when mixed and can be brushed onto a variety of surfaces or into rubber molds. Cures at room temperature with virtually no shrinkage to a hard, durable plastic that exhibits good compressive and flexural strength. Fully cured castings are rigid and can be sanded, primed and painted. Ideal for making fast, lightweight rigid molds for creating silicone appliances and effects (use as a replacement for stone molds) used for casting silicones directly without a mold release. Can also be brushed as a “gel coat” into a rubber mold and backed up with rigid foam, creating a highly detailed lightweight casting or onto styrofoam (polystyrol) as an impact resistant coating that can be sanded, primed and painted. Can also be used to make rigid support shells for Brush-On rubber molds.
Color effects possible by adding SO-Strong. Can be mixed together with Bronze Powder to produce cold cast metal sculptures. A release agent (Ease Release 200) is necessary to facilitate demolding when applying into or over most surfaces.
Technical Data Sheet
Mixing Ratio: 1A:4B by Volume
Viscosity: 3 000 cps
Pot Life: 3 Minutes
Demold Time: 60 Minutes
Shore D Hardness: 85D
Color: Beige
Weight:
Pint: 3,6 lb
Gallon: 12 lb
Color effects possible by adding SO-Strong. Can be mixed together with Bronze Powder to produce cold cast metal sculptures. A release agent (Ease Release 200) is necessary to facilitate demolding when applying into or over most surfaces.
Technical Data Sheet
Mixing Ratio: 1A:4B by Volume
Viscosity: 3 000 cps
Pot Life: 3 Minutes
Demold Time: 60 Minutes
Shore D Hardness: 85D
Color: Beige
Weight:
Pint: 3,6 lb
Gallon: 12 lb
- Quantity Available: 2