XTC-3D
Press and move to zoom.
Mouse over image to zoom.
Click to enlarge
Smooth-On

XTC-3D

Product Code:SOEAXTCP

Protective coating for smoothing and finishing 3D printed parts that does not melt plastic. Fills in 3D print striations and create a smooth, high gloss finish. The need to post finish is almost eliminated. Can be applied to both SLA and SLS prints. Works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media such as EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper. Does not contain VOC’s, phthalates or phosphates. Can be mixed with Metal Powders, SO-Strong tints and Ignite or UVO pigments making adding colors and metal effects easy.


Technical Data Sheet

Mixing Ratio: 2A:1B by Volume
Viscosity: 350 cps
Pot Life: 10 Minutes
Cure Time: 3,5 Hours
Shore D Hardness: 80D
Color: Clear


 

Weight:
Pint: 0,41 lbs
Quart: 1,42 lbs
Gallon: 12 lbs
CAD $17.95
  • Quantity Available: 5
Average Rating:
Rate this product:
Be the first to write a review for this product!